consumer hotline : 400-0090799

Welcome to the official website of Tai'an Hualu Forging Machine Tool Co., Ltd.!

FINE WORK,

KEEP IMPROVING

133-9548-2185

Support hotline:

Language:

After-sales service phone: 0538-6629071

Phone:133-9548-2185  Manager Zhang

FAX:0538-6629010

Address: No. 381 Longtan Road, Tai'an City, Shandong, China

Customer Service Phone: 400-0090799

TEL:0538-6629065 6629066(domestic) 0538-6629089 (International Department)

CopyRight © 2019 Tai'an Hualu Forging Machine Tool Co., Ltd.  All Rights Reserved.

Powered by www.300.cn

PRODUCT CENTER

Name

WB12 4 rolls bending machine

Affiliate classification
没有此类产品
Details
Image Display
Technical Parameters

WS11K NC level down three roller bending machine, is the design of new product development in Germany under the guidance of experts, the novel structure, superior performance, technical level reached the international advanced level. This series machine adopts a number of national patent technology, with independent intellectual property rights. Can be on the thickness of 350mm - 150mm-4000mm width 6mm of the plate to roll system.
The machine can feed a material do not need to turn to complete the sheet end pre bending and rolling metal plate. Can also carry out rough shaping of sheet metal, with low energy consumption, low noise, power of main motor with small value, high energy saving, simple operation, precision bending. In addition, WS11K NC level down three roller coiling machine has the following characteristics:
1, the use of double driving three roller bending machine patent (ZL200420096162.1), the two lower rollers are driven by separate power system, due to the elimination of the sliding friction caused by mechanical interference, vibration and wear, and roller bearings for rolling mill with roller bearing, the friction resistance is small, so the low energy consumption, low noise, the main motor power demand value small, energy saving and environmental protection.
2, the hydraulic three roller bending machine patent (ZL200420001177.5), an integrated cylinder patent (ZL200540053274.8) and a rolling machine volume cone device patent (ZL200520129154.7), the lower end of the cylinder head is placed in the bed, the frame has the advantages of compact structure, straight body size, not only reduces the space occupied by the machine and turn head body dynamic I can, and around the body rolled the small end of the smaller diameter cone and the butterfly, expand the scope of use.
3, the level down lapping machine mobile device patent (ZL200520007511.2), the level of the mobile device has the advantages of compact structure, accurate positioning, convenient maintenance.
4, the upper roller at both ends of the synchronous lifting, roll cone tilt control and leveling, the lower roller horizontal movement of the control by the CNC system automatic control, high precision control.
5, CNC system for its own development, the leading domestic, with the screen display, roll system, program control, process parameters storage, software protection and fault alarm, man-machine dialogue and other functions.

8.8 WE11Ship rolling machine

The products are widely used in machinery, metallurgy, building materials, chemical industry, electronics, electric power, light industry and other industries, especially in military, aerospace, shipbuilding, locomotive, boiler, bridges, steel and other fields, products covering the whole country, and exported to Asia, Africa, Europe and other countries.
WB12K CNC hydraulic four roller bending machine
WB12K CNC hydraulic four roller bending machine, can be a material do not need to turn to complete the sheet end pre bending and roll forming of sheet metal, and the various machine remaining in the straight edge minimum. The series can be rolled thickness 120mm - 2000mm-4000mm width 6mm of the plate.
This series of machine has the following characteristics:
1, the pre bending residual straight edge small.
2, the volume of the system efficiency, the volume of the system precision and the precision of the circle.
3, NC hydraulic four roller bending machine due to the increase of the lower roll on a plate material through program control can realize the automatic pre bending and rolling forming operation, technical level of operator's requirements is not high.
4, NC hydraulic four roller bending machine due to the increase of the ends can be separately lifting roller and roller on both sides, so the defects during the winding process of the wrong side, the size of the mouth can be easily corrected, high efficiency.
5, work roll bearing with self-aligning roller bearing for rolling mill, small frictional resistance, power loss, long service life, low energy consumption.
6, the two ends of the lower roller and the side roller synchronous lifting, roll cone tilt control and adjust the average by the automatic control of the CNC system, high control precision.
7, CNC system for the company's independent research and development, the leading domestic, with the screen display, roll system, program control, process parameter storage, software protection and fault alarm, man-machine dialogue and other functions.

8.8 WE11Ship rolling machine

8, the frame of patent four roller machine (ZL201220488868.7), a new frame has the advantages of reasonable structure, does not need to remove the upper roller can be easily removed and replaced on both sides, the characteristics of convenient assembly and side parts.
The products are widely used in machinery, metallurgy, building materials, chemical industry, electronics, electric power, light industry and other industries, especially in military, aerospace, shipbuilding, locomotive, boiler, bridges, steel and other fields, products covering the whole country, and exported to Asia, Africa, Europe and other countries.
WB12KY automatic four roller bending machine
WB12KY automatic four roller coiling machine is developed in the NC hydraulic four roller bending machine based on, except all the advantages of CNC hydraulic four roller bending machine has the automatic four roller bending machine, the operation is more convenient:
1, automatic rolling machine has the advantages of simple operation, low requirements for operators: the user will have workpiece rolling parameters: basic parameters such as plate thickness, plate width, coil diameter, material input devices such as man-machine interface, automatic four roller bending machine control expert system can calculate the work roll process steps the. The data calculated by the computer and the actual application data are sometimes different, according to the calculated results, the need for manual optimization, that is, the trial board to find data. After the test board is stored in the computer, the same batch, with the specifications of the workpiece, directly after the data is directly exported to press the start button to automatically carry out the workpiece roll system.
2, automatic rolling machine has high production efficiency, reduce labor costs:
The results of the test board are stored in the computer, with the same batch, with the specifications of the workpiece, directly after the data is directly exported to press the start button to automatically carry out the workpiece roll system. Thus greatly improving the production efficiency, reduce labor costs.
3, automatic rolling machine roll workpiece of high precision:
The lower roller and the side roller are provided with a proportional valve to ensure the accuracy of the lifting displacement, and the machining accuracy of the workpiece is greatly improved.
4, automatic bending machine is more suitable for the producers of large quantities of workpiece:
After the calculation results are saved, the same work piece can be called directly. Industrial computer can store 9999 parts of the rolling process parameters.
5, using an automatic four roller bending machine bending process patent (ZL201210538616.5) this process is simple and convenient for the user, reduce the dependence on skilled workers, and improve the machine precision, increase the efficiency in the use of the equipment.
Full automatic rolling production line
Automatic rolling production line by stock car, feeding device, conveying device, automatic bending machine, support pushing integrated device, unloading device. Full automatic rolling production line from the plate feeding after winding discharging are completed automatically, the whole process is controlled by computer program. No longer rely too much on lifting equipment, reduces the labor intensity of workers, improves the production efficiency and product quality, is a kind of high precision, high efficiency and flexible rolling production line.
This series of machine production line has the following characteristics:
1, using a flexible automatic rolling production line, the invention patent (ZL201310691529.8) expected after winding discharging are completed automatically on the plate, no longer rely too much on lifting equipment, reduces the labor intensity of workers, improves the production efficiency and product quality, is a kind of high precision, high efficiency and high the flexible rolling production line.

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待