WS11KY-260 × 3500 wind power CNC three-roller plate bending machine
+
  • WS11KY-260 × 3500 wind power CNC three-roller plate bending machine

WS11KY-260 × 3500 wind power CNC three-roller plate bending machine

WS11KY CNC full hydraulic variable roller spacing horizontal down-adjustment three-roller plate bending machine is the latest horizontal down-adjustment three-roller plate bending machine, which can complete the end pre-bending and rolling of sheet metal in one feeding.

Key words:

WS11KY-260 × 3500

Description

WS11KY CNC full hydraulic variable roller spacing horizontal down-adjustment three-roller plate bending machine is the latest horizontal down-adjustment three-roller plate bending machine, which can complete the end pre-bending and rolling of sheet metal in one feeding.

Thickness specifications 6mm-350mm, width specifications 1000mm-12000mm

The model also has the following features:
▶The working rolls are all rolled steel and treated with tempering. The work roll chemical composition, hardness test and ultrasonic flaw detection report shall be provided when the equipment is delivered.
▶Work roll bearings are all used wide series spherical roller bearings.
▶The upper roller is pressed down by using the conjoined double cylinder technology, which is arranged one up and one down.
▶The center distance of the two lower rollers can be adjusted stepless, and the two lower rollers can be shaped into eight characters. Each lower roller can move separately or two lower rollers can move synchronously. With pre-bending and symmetrical rolling function.
▶Three roller full drive: the upper and lower working rollers are driven by their own independent hydraulic motor and planetary reducer.
▶The hydraulic system is independent of the machine body and is easy to maintain. The hydraulic system is equipped with cooling and oil temperature heating devices.
▶Remote control and mobile console two sets of operating system, but mutual security interlock, only one system can be used at a time.
▶Control system independent research and development of domestic leading, there are two kinds of manual and automatic control mode, and can switch each other.

111

CNC full hydraulic wind power special three-roller bending machine

Thickness specification 20mm-260mm, width specification 3000mm-4500mm

High-strength and high-torque design to meet the needs of continuous high-intensity work

Advanced hydraulic variable center distance three-roll machine type

Side support with radial and axial error correction device

Hydraulic jacking support, overload overflow

A full set of accessories to ensure efficient and fast rolling

A full set of accessories to ensure efficient and fast rolling

111

WS11KY CNC wind power special three-roller bending machine structure diagram

Welcome customers to leave a message!

If you have any questions about the product, please leave your contact information and we will contact you as soon as possible.


Submission

Product recommend